Tag Archives: groove ball bearing

China supplier Machine Tool Spindle Machine Gas Turbine Ball Bearing 6010 6012 6014 6016 RS Zz CZPT Deep Groove Ball Bearing 6012zz with Hot selling

Product Description

Product Description

Product Name Deep Groove Ball Bearings
Brand Name NMN
Material Chrome Steel  GCr15  Stainless Steel  Ceramic  Nylon
Cage Steel  Brass  Nylon
Weight(Kg) 0.385
Bearing Clearance C0 C2 C3 C4 C5
Seals Type Z 2Z 2RS Znr 2RS1 2rsh 2rsl 2znr
Precision Grade P0  P6  P5  P4  P2
Vibration V1 V2 V3 V4
Quality ABEC1, 3, 5, 7,9
Load Rating(kN) Cr 29.5
Cor 23.2
Limiting Speed Grease 5000
Oil 6300
Serice OEM
Sample Available
Port HangZhou/ZheJiang

Product Details

Single row deep groove ball bearings are used in a wide variety of applications, they are simple in design, non-separable, suitable for high speeds and are robust in operation, and need little maintenance. Deep raceway grooves and the close conformity between the raceway grooves and the balls enable deep groove ball bearings to accommodate axial loads in both directions, in addition to radial loads.

6012 bearing has the advantages of low noise, low friction and high speed, and is equipped with sealing cover, grease, etc., to extend the life of the product.
We provide OEM, ODM and other services, and provide you with relevant consulting information to help you with bearing selection, clearance configuration, product life and reliability analysis. We offer localized shipping solutions to save your shipping costs.
We can provide free samples, can accept custom LOGO or drawings, can design packaging according to requirements.

Bearing Models

 

Number Specifiction Load Rating (KN) Limiting Speed (r/min) Weight(Kg/pc)
d(mm) D(mm) B(mm) r(mm) Cr Cor Grease Oil
604 4 12 4 0.2 0.9 0.36 43000 51000 0.002
605 5 14 5 0.2 1.33 0.505 39000 46000 0.0035
606 6 17 6 0.3 2.19 0.865 30000 38000 0.006
607 7 19 6 0.3 2.24 0.91 28000 3600 0.008
608 8 22 7 0.3 3.35 1.4 26000 34000 0.012
609 9 24 7 0.3 3.4 1.45 22000 30000 0.014
6000 10 26 8 0.3 4.55 1.96 20000 28000 0.019
6001 1 28 8 0.3 5.1 2.39 19000 26000 0.571
6002 15 32 9 0.3 5.6 2.84 18000 24000 0.03
6003 17 35 10 0.3 6.8 3.35 17000 22000 0.039
6004 20 42 12 0.6 9. 5.05 1000 19000 0.069
6005 25 47 12 0.6 10.1 5.85 13000 17000 0.08
6006 30 55 13 1.0 13.2 8.3 12000 15000 0.116
6007 35 62 14 1.0 16 10.3 10000 13000 0.155
6008 40 8 15 1.0 16.8 11.5 8000 11000 0.185
6009 45 5 16 1.0 21 15.1 7200 9000 0.231
6571 50 80 16 1.0 21.8 16.6 6400 7800 0.25
6011 55 90 18 1.1 28.3 21.2 5700 7000 0.362
6012 60 95 18 1.1 29.5 23.2 5000 6300 0.385
6013 65 100 18 1.1 31.9 25 4800 6100 0.44
6014 70 110 20 1.1 39.7 31 4600 5800 0.6
6015 75 115 20 1.1 41.6 33.5 4400 5600 0.64
6016 80 125 22 1.1 47.5 40 4300 5500 0.854
6017 85 130 22 1.1 49.5 43 200 5300 0.89
6018 90 140 24 1.5 58 49.5 4000 5100 1.02
624 4 13 5 0.2 1.31 0.49 36000 45000 0.0032
625 5 16 5 0.3 1.76 0.68 32000 40000 0.0048
626 6 19 6 0.3 2.34 0.885 28000 36000 0.0081
627 7 22 7 0.3 3.35 1.40 26000 34000 0.013
628 8 24 8 0.3 4.00 1.59 24000 32000 0.017
629 9 26 8 0.3 4.55 1.96 22000 40000 0.0048

Packaging & Shipping

·Plastic rolling packing + Plastic bag + Paper carton
·Single Box + Plastic rolling packing + Plastic bag + Paper carton+pallet
·According to customer requirement

Applications

About Us

ZheJiang CZPT Bearing Group is a professional bearing manufacturer and exporter in China. We have been engaged in bearing industry for 20 years. Our company is specialized in producing Deep Groove Ball Bearings, Tapered Roller Bearings, Spherical Roller Bearings and Special Bearings in accordance with Customers’ designs.Our bearings has been widely applied into agricultural equipments, home appliances, power equipments, machine tools, automotives and engineering machinery, etc.

Our production is strictly executed with ISO9001 and ISO14001. Our products are mainly exported to Singapore, South Kora, Vietnam, Thailand, Turkey, Pakistan, Australia, Polan, France, UK, South America, USA, South Africa and other countries and regions of the world, with great public praise of high quality and reasonable price.

Company Profile

FAQ

1.Q:Could you supply free sample of bearing for our test?
A:Yes. Please afford the express fee and we will send you the sample within your first order.

2.Q:Sample time?
A:Within 3-4 days.

3.Q:Are you a factory or a Trade Company for Bearing ?
A:We are the factory.

4.Q:Whether you could make your products by our color?
A:Yes, The color of products can be customized if you can meet our MOQ.

5.Q:Could you accept OEM and customize?
A:Yes, OEM and ODM are accepted and we can customize for you according to sample or drawing.

6.Q:Do you have stocks?
A:Yes, most of the bearings showing on alibaba are in stock,especialy big bearings.

 

 

 

We sincerely hope we can build a long term relationship with all the clients and we also have great confidence in cooperating with every potential customer by most premium service and competitive price.

Welcome your inquiry and welcome your visit. 

What Are Screw Shaft Threads?

A screw shaft is a threaded part used to fasten other components. The threads on a screw shaft are often described by their Coefficient of Friction, which describes how much friction is present between the mating surfaces. This article discusses these characteristics as well as the Material and Helix angle. You’ll have a better understanding of your screw shaft’s threads after reading this article. Here are some examples. Once you understand these details, you’ll be able to select the best screw nut for your needs.
screwshaft

Coefficient of friction between the mating surfaces of a nut and a screw shaft

There are 2 types of friction coefficients. Dynamic friction and static friction. The latter refers to the amount of friction a nut has to resist an opposing motion. In addition to the material strength, a higher coefficient of friction can cause stick-slip. This can lead to intermittent running behavior and loud squeaking. Stick-slip may lead to a malfunctioning plain bearing. Rough shafts can be used to improve this condition.
The 2 types of friction coefficients are related to the applied force. When applying force, the applied force must equal the nut’s pitch diameter. When the screw shaft is tightened, the force may be removed. In the case of a loosening clamp, the applied force is smaller than the bolt’s pitch diameter. Therefore, the higher the property class of the bolt, the lower the coefficient of friction.
In most cases, the screwface coefficient of friction is lower than the nut face. This is because of zinc plating on the joint surface. Moreover, power screws are commonly used in the aerospace industry. Whether or not they are power screws, they are typically made of carbon steel, alloy steel, or stainless steel. They are often used in conjunction with bronze or plastic nuts, which are preferred in higher-duty applications. These screws often require no holding brakes and are extremely easy to use in many applications.
The coefficient of friction between the mating surfaces of t-screws is highly dependent on the material of the screw and the nut. For example, screws with internal lubricated plastic nuts use bearing-grade bronze nuts. These nuts are usually used on carbon steel screws, but can be used with stainless steel screws. In addition to this, they are easy to clean.

Helix angle

In most applications, the helix angle of a screw shaft is an important factor for torque calculation. There are 2 types of helix angle: right and left hand. The right hand screw is usually smaller than the left hand one. The left hand screw is larger than the right hand screw. However, there are some exceptions to the rule. A left hand screw may have a greater helix angle than a right hand screw.
A screw’s helix angle is the angle formed by the helix and the axial line. Although the helix angle is not usually changed, it can have a significant effect on the processing of the screw and the amount of material conveyed. These changes are more common in 2 stage and special mixing screws, and metering screws. These measurements are crucial for determining the helix angle. In most cases, the lead angle is the correct angle when the screw shaft has the right helix angle.
High helix screws have large leads, sometimes up to 6 times the screw diameter. These screws reduce the screw diameter, mass, and inertia, allowing for higher speed and precision. High helix screws are also low-rotation, so they minimize vibrations and audible noises. But the right helix angle is important in any application. You must carefully choose the right type of screw for the job at hand.
If you choose a screw gear that has a helix angle other than parallel, you should select a thrust bearing with a correspondingly large center distance. In the case of a screw gear, a 45-degree helix angle is most common. A helix angle greater than zero degrees is also acceptable. Mixing up helix angles is beneficial because it allows for a variety of center distances and unique applications.
screwshaft

Thread angle

The thread angle of a screw shaft is measured from the base of the head of the screw to the top of the screw’s thread. In America, the standard screw thread angle is 60 degrees. The standard thread angle was not widely adopted until the early twentieth century. A committee was established by the Franklin Institute in 1864 to study screw threads. The committee recommended the Sellers thread, which was modified into the United States Standard Thread. The standardized thread was adopted by the United States Navy in 1868 and was recommended for construction by the Master Car Builders’ Association in 1871.
Generally speaking, the major diameter of a screw’s threads is the outside diameter. The major diameter of a nut is not directly measured, but can be determined with go/no-go gauges. It is necessary to understand the major and minor diameters in relation to each other in order to determine a screw’s thread angle. Once this is known, the next step is to determine how much of a pitch is necessary to ensure a screw’s proper function.
Helix angle and thread angle are 2 different types of angles that affect screw efficiency. For a lead screw, the helix angle is the angle between the helix of the thread and the line perpendicular to the axis of rotation. A lead screw has a greater helix angle than a helical one, but has higher frictional losses. A high-quality lead screw requires a higher torque to rotate. Thread angle and lead angle are complementary angles, but each screw has its own specific advantages.
Screw pitch and TPI have little to do with tolerances, craftsmanship, quality, or cost, but rather the size of a screw’s thread relative to its diameter. Compared to a standard screw, the fine and coarse threads are easier to tighten. The coarser thread is deeper, which results in lower torques. If a screw fails because of torsional shear, it is likely to be a result of a small minor diameter.

Material

Screws have a variety of different sizes, shapes, and materials. They are typically machined on CNC machines and lathes. Each type is used for different purposes. The size and material of a screw shaft are influenced by how it will be used. The following sections give an overview of the main types of screw shafts. Each 1 is designed to perform a specific function. If you have questions about a specific type, contact your local machine shop.
Lead screws are cheaper than ball screws and are used in light-duty, intermittent applications. Lead screws, however, have poor efficiency and are not recommended for continuous power transmission. But, they are effective in vertical applications and are more compact. Lead screws are typically used as a kinematic pair with a ball screw. Some types of lead screws also have self-locking properties. Because they have a low coefficient of friction, they have a compact design and very few parts.
Screws are made of a variety of metals and alloys. Steel is an economical and durable material, but there are also alloy steel and stainless steel types. Bronze nuts are the most common and are often used in higher-duty applications. Plastic nuts provide low-friction, which helps reduce the drive torques. Stainless steel screws are also used in high-performance applications, and may be made of titanium. The materials used to create screw shafts vary, but they all have their specific functions.
Screws are used in a wide range of applications, from industrial and consumer products to transportation equipment. They are used in many different industries, and the materials they’re made of can determine their life. The life of a screw depends on the load that it bears, the design of its internal structure, lubrication, and machining processes. When choosing screw assemblies, look for a screw made from the highest quality steels possible. Usually, the materials are very clean, so they’re a great choice for a screw. However, the presence of imperfections may cause a normal fatigue failure.
screwshaft

Self-locking features

Screws are known to be self-locking by nature. The mechanism for this feature is based on several factors, such as the pitch angle of the threads, material pairing, lubrication, and heating. This feature is only possible if the shaft is subjected to conditions that are not likely to cause the threads to loosen on their own. The self-locking ability of a screw depends on several factors, including the pitch angle of the thread flank and the coefficient of sliding friction between the 2 materials.
One of the most common uses of screws is in a screw top container lid, corkscrew, threaded pipe joint, vise, C-clamp, and screw jack. Other applications of screw shafts include transferring power, but these are often intermittent and low-power operations. Screws are also used to move material in Archimedes’ screw, auger earth drill, screw conveyor, and micrometer.
A common self-locking feature for a screw is the presence of a lead screw. A screw with a low PV value is safe to operate, but a screw with high PV will need a lower rotation speed. Another example is a self-locking screw that does not require lubrication. The PV value is also dependent on the material of the screw’s construction, as well as its lubrication conditions. Finally, a screw’s end fixity – the way the screw is supported – affects the performance and efficiency of a screw.
Lead screws are less expensive and easier to manufacture. They are a good choice for light-weight and intermittent applications. These screws also have self-locking capabilities. They can be self-tightened and require less torque for driving than other types. The advantage of lead screws is their small size and minimal number of parts. They are highly efficient in vertical and intermittent applications. They are not as accurate as lead screws and often have backlash, which is caused by insufficient threads.

China supplier Machine Tool Spindle Machine Gas Turbine Ball Bearing 6010 6012 6014 6016 RS Zz CZPT Deep Groove Ball Bearing 6012zz   with Hot sellingChina supplier Machine Tool Spindle Machine Gas Turbine Ball Bearing 6010 6012 6014 6016 RS Zz CZPT Deep Groove Ball Bearing 6012zz   with Hot selling