Product Description
600m Deep Hole Drilling Rig Machine for Water Well
Product Information of XY-600F Drilling Rig Machine
XY-600F hydraulic drilling rig adopts the latest technology for CZPT drilling. It is widely used to
drill water well, geothermal hole, mining blasting, geological exploration, water conservancy, etc.
Parameters of XY-600F Drilling Rig Machine
| XY-600F Drilling Rig | ||
| 1. Main Parameters | ||
| Max. Drilling Depth | 600m | |
| Diameter of drill pipe | Φ42,Φ50,Φ60,Φ76 | |
| Angle of vertical spindle | 90°~65° | |
| Drilling capability | ||
| Φ75mm drill diameter | Max. Depth 600m | |
| Φ108mm drill diameter | Max. Depth 500m | |
| Φ127mm drill diameter | Max. Depth 400m | |
| Φ159mm drill diameter | Max. Depth 300m | |
| Φ219mm drill diameter | Max. Depth 210m | |
| Φ273mm(10-4/5in) drill diameter | Max. Depth 150m | |
| Φ500mm(19-3/5in) drill diameter | Max. Depth 80m | |
| 2. Vertical Spindle | ||
| Rotation speed | Forward 10 grades | 30-1050r/min |
| Reverse 2 grades | 29-137r/min | |
| Spindle stroke | 560mm | |
| Spindle bore | 96mm | |
| Hoisting capability | 6000kg | |
| Max. Torque | 3800N.m | |
| 3. Main hoist | ||
| Lifting speed of single wire | 0.5-1.9m/s | |
| Diameter of wire rope | 12.5mm | |
| Carry capacity of single wire | 4000kg | |
| Diameter of winding drum | 300mm | |
| Volume of winding drum | 50m | |
| Lifting capability of single wire | 3000kg | |
| 4.Auxiliary Hoist | ||
| Winding drum | 140mm | |
| Diameter of steel wire rope | 6mm | |
| Volume of winding drum | 450m | |
| 5. Mud pump(as per your choice) | ||
| Horizontal triplex mud pump | BW-200II | |
| Displacement | 200L/min | |
| Working pressure | 50kg/cm² @ 5MPa | |
| Diameter of water inlet hose | 65mm | |
| Diameter of water outlet hose | 38mm | |
| 6.Power supply(choose 1 between the following two) | ||
| Diesel engine | Model 4100,38KW(50PS) | |
| Electrical motor | Y180M-4B35,22kw | |
| 7. Weight and Dimension of main drilling rig | ||
| Weight | 2880kg | |
| Dimension | 3700×1850×3200mm | |
| 8.Six-wheel Trailer | ||
| Walking speed | 25Km/hr | |
| Frame carrying capacity | 4 tons | |
| Steering wheel 600-14 | 0.75 tons | |
| Bearing wheel 650-15 | 0.9 tons | |
| Minimum turning angle | 6.8m | |
| 9. Oil Pump | CBN-F32 | |
| Working pressure | 20Mpa | |
| Displacement | 32L/min | |
Characteristics of XY-600F Drilling Rig Machine
(1) XY-600F adopts the newest automobile transmission assembly, with 10 grades forward rotation
speed and 2 grades reverse rotation speed, reasonable design, wide speed adjustable range, can
meet various stratum drilling requirements.
(2) Can meet the demand for various high efficiency drilling process needs, such as diamond wire
line coring, impact drilling, reverse circulation continuous coring (sampling) etc.
(3) Strong power, strong torque, strong bearing capacity, convenient to solve different downhole
accidents. Compact mechanical transmission structure, light weight, large diameter of spindle bore,
hydraulic stabilizer legs, good rigidity .
(4) Using hexagonal kelly bar to ensure the stable transmission of torque. Can not only meet the
small-diameter CZPT deep hole drilling, but also can satisfy the large-diameter carbide drilling
and different engineering drilling works.
(5) Advanced hydraulic system design makes the control handles concentrated, compact layout
reasonable, easy operation, flexible and reliable; Can realize remote speed change, more
humanization operation.
(6) The hydraulic system can adjust the feed pressure and feed speed during controlling the feed
process, in order to meet different stratum drilling needs. At the same time it is equipped with the
bottom hole pressure indicator, easy to master the situation inside the hole.
(7) The vertical spindle is equipped with hydraulic chuck,using the connecting rod type spring to
clamp, hydraulic chuck to loosen, carbide welding type slips, strong clamping force,long service life
and reliable operation.
(8) Advanced transfer case design, can implement easily independent operation of vertical shaft
and winch.
Working of XY-600F Drilling Rig Machine
DEFY Service
1.Professional technical support pre-sale, sale and after-sale .
2.Your problems can get feedback in 8 hours and be solved in 24 hours.
3.Machine can be customized as per your requirement.
4.One year quality warranty.
5.Training: operation manual and DVD operation video, overseas installation is also available.
6.Spare parts are available in our factory at cost price for former customers.
Other models for your choice:
|
Model |
Drilling Caliber |
Max. depth |
Feature |
|
XY100 |
75~300mm |
100m |
Disassemble drill tower; Small in size. |
|
XY-130 |
75~300mm |
130m |
|
|
XY-150 |
75~400mm |
150m |
|
|
XY-180 |
75~400mm |
180m |
|
|
XY-200 |
75~400mm |
200m |
|
|
XY-200F |
75~400mm |
200m |
Integrative drill tower; Easy to transport. |
|
XY-200C |
75~400mm |
200m |
|
|
XY-600F |
75~500mm |
600m |
FAQ
Q1: Are you trading company or manufacturer?
A1: We are original equipment manufacturer.we design,produce and sell.We master the core
technology, and constantly adjust our products according to the market trend and customer
feedback, ensure product quality.
Q2: How long is your delivery time?
A2: It is according to the model and quantity.
Generally it is 3-5 days if the machines are in stock.
It will be 15-30 days if you want to customize the machines.
Q3: What do I need to do after payment?
A3: a) If under FOB trading terms,you need to employ a ship forwarder to ship the goods to you;
b) Under CIF trading terms,we send the goods to the destination port,and contact you to pick
up the goods; All documents for customs clearance will be sent to you by international
express after shipment.
How to choose a suitable drilling rig?
1. What will you do using drilling rig?
—For water project, core sample, soil test, mineral prospect or others?
2. The depth you need?
—For water well, generally, 30-200m. For core sample, 30-600m, even more.
3. Any requirements to hole diameter?
—Within a certain range, the smaller diameter, the deeper depth. Mathematically, we call it
inversely proportional.
4. Working land condition?
A. soil, sand, weathered land, etc. soft stratum.
B. soil, sand, soft and hard rock stratum, mixed one.
C. Mainly hard rock, like granite.
Based on the above information, Our experienced engineers will help you recommend suitable
machine and price. If you have special demands, please tell us ahead.
About Us
HangZhou CZPT Mechanical & Electrical Equipment Co.,Ltd. locates in High-tech zone of
HangZhou city, China.
Our factory dedicates in manufacturing drilling rig since 1970s, more than 40 years’ experience
of production and development makes our product quality rank in the leading position at home and
abroad.
We are always seeking for ever greater perfection, keeping improving the production technology,
offering better user experience.
Screw Shaft Types
If you’re looking for a screw shaft, but aren’t sure which type to buy, you’re in luck. In this article, we’ll talk about the different types, including Threaded shank, Round head, and Machined. Once you’ve read it, you’ll know which type to buy. Then, you can decide whether you want a ball screw nut or a threaded shank.
Machined screw shafts
Besides the standard stainless steel shaft, manufacturers also provide a variety of other materials, such as titanium, bronze, and brass. In addition to stainless steel, manufacturers also provide a variety of top-coating options, including zinc, brass, and chromium. Aluminum screws are not particularly durable and are easily affected by weather. Most screw shafts feature self-locking mechanisms. They are especially useful in C-clamps, vises, and screw-top container lids.
For applications where accuracy is vital, a ball screw shaft needs to be annealed. A heat treatment can be performed on the ball screw shaft to ensure that both ends are heated evenly. In this process, the shaft will be more durable, while maintaining its high-precision properties. These screw shafts are a key component in computer-controlled motion-control systems, wire bonding, and other industries that require high-precision and high-quality performance.
Depending on the material used, screw shafts can be made of stainless steel or titanium. High-precision CNC machines and lathes are typically used to manufacture screw shafts. Various shapes and sizes are available, each with a specific application. Whether you need a small or large screw, you can find 1 to fit your needs. And since each size requires a different material, your choice of material is important as well.
In general, the materials used for machining screw shafts are steel, stainless steel, titanium, brass, bronze, and aluminum. Metals that resist corrosion are also commonly used. Other materials for screw shafts are Teflon, nylon, and nylon. You can also find threaded screw shafts in materials such as porcelain, glass, and ceramic. If you want to use your screws in a unique material, consider purchasing a customized one.
Ball screw nuts
If you have a screw shaft, the last thing you want to worry about is the ball nut slipping off. To prevent this, you can place a temporary stop in the shaft’s grooves to ensure that the ball nut does not slide off. When you remove the stop, you can then install the ball screw nut. But, before you can install the ball screw nut, you have to make sure that you have a good grip on the shaft.
When selecting ball screw nuts, it’s important to consider how much preload you need to apply to avoid excessive backlash. Preloading eliminates this problem by making the ball nut compact. It also prevents backlash, which is lost motion caused by clearance between the ball and nut. Backlash disrupts repeatability and accuracy. This is where spacer preloading comes in. You can insert a spacer between the 2 ball nuts to transmit the force to the nut. However, you should keep in mind that this method reduces the load capacity of the ball screw.
The critical speed of a screw is the maximum rotating speed before it whips. This critical speed is influenced by several factors, including the diameter of the screw shaft, the number of support elements, and the material. By adjusting these factors, you can reduce the number of components used and the amount of time it takes to assemble the screw shaft. In addition, you can also reduce the number of components and avoid stacking tolerances. However, the critical speed of plastic nuts is limited due to sliding friction.
The ball screw nut has several characteristics that make it unique. Its most prominent feature is the presence of ball bearings. These balls help reduce friction between the screw nut and the shaft. Without ball bearings, the friction would be too high to function properly. Another important characteristic is the groove profile of the nut and ball. These 2 features ensure that the ball and the nut meet at 2 points. You’ll be amazed by the results of the work of these ball screw nuts.
Threaded shank
Wood screws are usually not fully threaded because the shank has an unthreaded portion at the top. This shoulder part forces the screw to compress 2 pieces of wood, which prevents the screw from overheating and compromising the materials strength. As the screw is threaded partially up, it is not as difficult to remove as a fully threaded screw. However, it is important to note that a wood screw will not hold as tightly as 1 with a fully threaded shank.
In addition to being universal, screw threads can be of different sizes. For example, a M8 screw has a thread pitch of 1.25 mm. To avoid confusion, screw thread pitches are commonly given with a multiplication sign. For example, M8x1 means that the screw is 8 mm in diameter but has a thread pitch of 1 mm per 360-degree rotation. Those who are not familiar with these dimensions may find it confusing.
The OD of the threaded portion of a bolt is generally smaller than the OD of the nut. If the shank is too deep for the nut to fit, the threads may bottom out. This is why it’s important to use a thread-cutting bit with a small thread diameter. You can use a micrometer or caliper to measure the thread diameter. This tool will also allow you to easily identify which screw size fits where and how well.
The metric system is the most widely used. Fasteners with DIN numbers are generally metric in size. This makes them very useful for industrial settings. You can find metric-sized screws anywhere, as long as you buy them from a reputable manufacturer. These fasteners also come with a dog point, which is used for safety wire. If the screw needs to be replaced, the shank can be drilled with a hole for a safety wire or for a dog-point.
Round head
A round head screw is the most common type used for machine screws. Other common types include truss head, flat head, and hexed head. Each has a different profile and are used for different purposes. A round head screw is typically wider than a flat or a hexed head, and has a slightly rounded surface. These screws are useful for projects involving sheet metal or sheet-metal parts. Round heads are usually slightly wider than a hex head screw, and they may also be used as a substitute for washers in certain applications. However, truss heads are not necessary for every project.
A wood screw has a smooth shank that protrudes above the surface of the material it is attaching. A metal screw has a threaded shaft that is fully threaded from head to point, and a fully threaded shaft provides more bite. Two common head styles are round head and pan head. If the task requires the screw to be flush or countersunk, the round head will be the best choice.
Another type is the Reed & Prince screw drive. These are similar to Phillips screws but have a 75-degree V shape. They are commonly used in marine hardware and are also known as BNAE NFL22-070. This type is also used for steel plate hangers. In addition to round head and pan head screws, there are a variety of other screw types. You can even get a head with a slotted head if you know where to look.
Screw diameters are specified according to the ISO 261 or ISO 262 standards. An M8 screw has a diameter of 8.25 mm. The M8 screw has a pitch of 1.25 mm, which is equivalent to 1 mm per 360 degrees. There are several other standard screw sizes and thread diameters available. You can find them all by consulting the relevant standards. But remember, the metric system is the most popular.
Self-locking mechanism
A self-locking mechanism for a screw shaft is a device that secures the screw to its supporting member in a failure position. The locking mechanism provides a positive connection between the screw shaft and the control surface during normal operation, and locks the screw to its supporting member when the screw fails. Previous attempts to solve this problem have typically used secondary nuts with free play on the screw, which were intentionally designed to jam when loaded. However, such a device can be unreliable, which is why the present invention offers a more robust and reliable locking mechanism.
The self-locking function of a screw depends on several factors, including its pitch angle and the coefficient of friction of the threads. The angle of friction must be less than the tangent of the material pairing to prevent untightening of the screw. Screws with self-locking mechanisms have an efficiency e lower than 50%, which is less than half. Self-locking screws also have the benefit of being less efficient than a standard screw.
Unlike a normal screw, a self-locking screw can be turned in either direction. The nut 22 rotates with the screw shaft, and the member 23 is translated in an axial direction. Regardless of the direction of the rotation of the screw, this axial translation will result in the opposite moment to that input moment. While screw self-locking mechanisms are typically less expensive, they are more reliable and durable.
Another important feature of self-locking screws is that they are not susceptible to independent loosening. The screw cannot rotate without a certain amount of torque. In addition, a self-locking screw shaft must have a small wedge with a smaller half-angle than the arctangent of the static friction. This means that the torque applied by the driver must be greater than the torque needed to overcome the friction.
